Article Sidebar

Submitted
Oct 22, 2020
Accepted
Dec 22, 2020
Published
Dec 30, 2020
Download
PDF
Statistic
Read Counter : 421 Download : 878

Downloads

Download data is not yet available.

Main Article Content

Abstract

The purpose of the community dedication program carried out in the Karya Rasa Lestari group is to make a snack product the pilus of catfish flavor. The implementation of this program goes through three stages: the interview stage with partners, literature study through literature review to get the type of mold machine, and training in making Pilus using the molding machine. Based on the literature review, it was found that a molding machine suitable for making Pilus was a vertical type mold machine. The result of the vertical type Pilus mold machine with a capacity of 100 kgs/hour with a diesel engine driving the capacity of 8 Hp. The result of the molding machine has a uniform shape according to the shape of the Pilus which is proven through the training of making Pilus with the taste of catfish. Produce fish taste in Pilus by adding catfish mixed with other ingredients. This Pilus food product is intended to increase the type of processed fish food business in the Karya Rasa Lestari group which will be produced in the future

Keywords

Mesin cetak; pilus; pelatihan.

Article Details

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

Author Biographies

Mohammad Nurhilal, Politeknik Negeri Cilacap

Teknik Mesin

Saiful Bahri, Politeknik Negeri Cilacap

Teknik Mesin

Taufan Ratri Harjanto, Politeknik Negeri Cilacap

Teknik Mesin

How to Cite
Mohammad Nurhilal, Saiful Bahri, & Taufan Ratri Harjanto. (2020). Optimalisasi Mesin Cetak Pelet dalam Pembuatan Pilus Cita Rasa Ikan Lele. CARADDE: Jurnal Pengabdian Kepada Masyarakat, 3(2), 352-359. https://doi.org/10.31960/caradde.v0i0.635
Download Citation
Endnote/Zotero/Mendeley (RIS)
BibTeX

References

  1. Amindoni. A. 2020. Virus Corona : Pendapatan usaha kecil ‘pupus’ akibat covid 19, pemerintah siapkan bantuan sosial untuk pekerja harian. Bbc.com/indonesia-52059235 [Internet] (diunduh tanggal 30 Maret 2020).
  2. Caplin. K., Smith, A. P. 2011. Definitions and Preception of Snacking. Current Topics in Nutraceutical Reasearch. Vol. 9 (1) p. 53-59.
  3. Ertanto. D. A., Daulay. S.B., dan Munir. A.P. 2017. Rancang Bangun Alat Pencetak Pelet Ikan Manual. Jurnal Rekayasa Pangan dan Pertanian, Vol. 5, No. 3.
  4. Hidayat. S., Zaini. M. A., dan Werdiningsih. W, 2015 Pengaruh Penambahan Ikan Nila (Oreochromis niloticus) Terhadap Senyawa Protein Kerupuk Singkong (Manihot utilissima).Jurnal Ilmu dan Teknologi Pangan, Vol. 1, No. 2, Hal. 62-69.
  5. Juliani. R, dkk. 2017. Mesin Dwi Fungsi Pencetak Pelet Ikan dengan Menggunakan Motor Tunggal. Jurnal Geliga Sains. 5 (1), Hal. 27-31.
  6. http://www.lidapelltmill.com/FlatDiePelletMill/Flatdiepelletmachime-20-413-1.html.
  7. Mahmudah. 2020. Meningkat, Minat Masyarakat Cilacap Budidayakan Lele dan Udang. https://jateng.antaranews.com/berita/232571/meningkat-minat-masyarakat-cilacap-budidayakan-lele-dan-udang. [Internet]. [diunduh Tanggal 29 April 2019].
  8. Mooniarsih, N. T., dan Sumiyattinah. 2016. Desain dan Implementasi Mesin Pengolah Limbah Ikan. Jurnal ELKHA, Vol. 8, No. 1, Hal. 32-36.
  9. Nugroho. S., Setyowidodo. I., dan Istiqlaliyah. H. 2018. Rancang Bangun Mesin Pencetak Pellet dari Limbah Telur Solusi Pakan Ternak Alternatif. Jurnal Mesin Nusantara, Vol. 1, No. 2, Hal. 104-113.
  10. Siagian. H. M. A. 2015. Modifikasi Mesin Pelet Untuk Pakan Ikan Dengan Menggunakan Dua Dan Empat Mata Pisau. [Skripsi] Program Studi Teknik Pertanian Universitas Sriwijawa.
  11. Wibowo. R., Putra. M. N. S., Riswanto. M. R., dan Bismala. L. 2019. Rancang Bangun Mesin Pengolah Pakan Lele Untuk Meningkatkan Efisiensi Biaya Operasional. Jurnal Sains Penelitian dan Pengabdian. Vol. 2, No. 2, Hal. 68-75.